Please use this identifier to cite or link to this item: http://repositorio.unicamp.br/jspui/handle/REPOSIP/92414
Type: Artigo de periódico
Title: Carbon Dioxide In Fog Form To Refrigerate The Cut Tool During Wood Machining [dióxido De Carbono Em Forma De Névoa Na Refrigeração Da Ferramenta De Corte, Durante A Usinagem Da Madeira]
Author: Gozeloto M.
Goncalves R.
Abstract: Heat concentration from wood cutting process promotes the tool premature wear, with consequent effect on the surface processed material, causing burnt areas as well as provoking larger superficial roughness than observed in machining process with absence of accumulated heat. The objective of this research was to evaluate the effect of cutting tool refrigeration during wood machining. The adopted mechanism was the use of pressurized carbon dioxide in fog form applied directly in the cutting area as a refrigeration method. The test was performed using Eucalyptus grandis and as cutting tool, a circular saw. To evaluate the wood final surface the following parameters were adopted; superficial roughness and occurrence of surface carbonization. The results showed that carbon dioxide applied in fog form, even at the smallest level (15g min-1), avoided the superficial carbonization of the processed material, as well as reduced the values of superficial roughness.
Editor: 
Rights: aberto
Identifier DOI: 
Address: http://www.scopus.com/inward/record.url?eid=2-s2.0-69149109610&partnerID=40&md5=3bfadb9c1925369204abd4fbf2a9bdf9
Date Issue: 2009
Appears in Collections:Unicamp - Artigos e Outros Documentos

Files in This Item:
File Description SizeFormat 
2-s2.0-69149109610.pdf150.32 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.