Please use this identifier to cite or link to this item: http://repositorio.unicamp.br/jspui/handle/REPOSIP/88944
Type: Artigo de evento
Title: Cfd Modeling Of Dissimilar Aluminum-steel Friction Stir Welds
Author: Idagawa H.S.
Torres E.A.
Ramirez A.J.
Abstract: Material flow in friction stir welding is an important aspect of the process since it can provide valuable information about the material mixture and allows tool design and process parameters improvement. In this work, a computational fluid dynamics model of an aluminum-steel dissimilar butt weld was implemented using the Finite Element (FE) software Comsol v4.3. The model assumes a viscoplastic material behavior and it was calibrated using temperature measurements for two different tool offsets (+0.5 and +1.5 mm) with respect to the joint line. The model can reproduce the maximum measured temperatures and heat imput, but the cooling rates are higher than the experimental ones. The simulated material flow is laminar and it is dependent on the tool geometry. The model can also provide information on the principal mechanism of heat generation for each material: friction in the steel and plastic deformation in the aluminum. Copyright © ASM International® All rights reserved.
Editor: 
Rights: fechado
Identifier DOI: 
Address: http://www.scopus.com/inward/record.url?eid=2-s2.0-84880674814&partnerID=40&md5=9a271363824f3a0f945eb381daf2e632
Date Issue: 2013
Appears in Collections:Unicamp - Artigos e Outros Documentos

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.