Please use this identifier to cite or link to this item: http://repositorio.unicamp.br/jspui/handle/REPOSIP/87366
Type: Artigo de evento
Title: Custom-built Implants Manufacture In Titanium Alloy By Direct Metal Laser Sintering (dmls)
Author: Larosa M.A.
Jardini A.L.
Bernardes L.F.
Wolf Maciel M.R.
Maciel Filho R.
Zavaglia C.A.C.
Zavaglia F.
Calderoni D.R.
Kharmandayan P.
Abstract: Custom-built implants manufacture has always presented difficulties which result in high cost and complex fabrication, mainly due to patients' anatomical differences. The solution has been to produce prostheses with different sizes and use the one that best suits each patient. Additive manufacturing (or rapid prototyping) is a process that was incorporated into the medical field in late 80's. Furthermore, the rapid prototyping has been used to produce implants especially designed for a particular patient, with sizes, shapes and mechanical properties optimized, for different areas of medicine such as craniomaxillofacial surgery, orthopedic surgery, orthognathic and maxillofacial surgery and traumatology, dental implants, neurosurgery among others. In this work, the microstructural and mechanical properties of Ti6Al4V samples produced by Direct Metal Laser Sintering (DMLS) are studied. © 2014 Taylor & Francis Group.
Editor: 
Rights: fechado
Identifier DOI: 
Address: http://www.scopus.com/inward/record.url?eid=2-s2.0-84892171807&partnerID=40&md5=2048cb2af3b5c1562dd7474a971aeb27
Date Issue: 2014
Appears in Collections:Unicamp - Artigos e Outros Documentos

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.