Please use this identifier to cite or link to this item:
Type: Artigo de periódico
Title: Friction Stir Welding Of Mild Steel To Alloy 625 - Development Of Welding Parameters
Author: Rodriguez J.
Ramirez A.J.
Abstract: Friction stir welding parameters were developed for a 6 mm thick dissimilar butt joint made of mild steel and Ni based alloy 625. A composite W-Re/polycrystalline cubic born nitride tool was used to study the effect of tool offset (between 0 and 3.13 mm away from the alloy 625 plate) and rotational speed (between 250 and 350 rev min-1) on joint consolidation. When non-optimal parameters were used, macrovoids were observed at the advancing side and faying surface near the joint interface root. Defect free joints were obtained using 300 rev min-1, 100 mm min-1, tool offset of 1.63 mm, and axial force between 25 and 30 kN, under force controlled mode. © 2014 Institute of Materials, Minerals and Mining.
Editor: Maney Publishing
Rights: fechado
Identifier DOI: 10.1179/1362171814Y.0000000198
Date Issue: 2014
Appears in Collections:Unicamp - Artigos e Outros Documentos

Files in This Item:
File Description SizeFormat 
2-s2.0-84897439284.pdf413.8 kBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.