Please use this identifier to cite or link to this item: http://repositorio.unicamp.br/jspui/handle/REPOSIP/80907
Type: Artigo de periódico
Title: Prediction of minimum fluidization velocity of gas-solid fluidized beds by pressure fluctuation measurements - Analysis of the standard deviation methodology
Author: Felipe, CAS
Rocha, SCS
Abstract: We analyze here an experimental method for the evaluation of Uf in gas fluidized beds, based on pressure fluctuation measurements in which U-mf is determined by the relationship between the standard deviation of pressure measurements and fluid velocity [M. Puncochar, J. Drahos, J. Cermak, K. Selucky, Evaluation of minimum fluidizing velocity in gas fluidized bed from pressure fluctuations, Chem. Eng. Commun. 35 (1985) 81-87]. This was tested in four different particles: Sand, Microcrystalline Cellulose, FCC and Alumina using two circular plexiglass columns with internal diameters of 0. 11 in and 0. 14 rn as the experimental apparatus. Validation of the method was made by comparing our U-mf results with those obtained by the fluid-dynamic curve. The experimental data revealed that: (1) the valid range of fluid velocity in the method employed by us is broader than those observed by other authors; (2) the method is suitable for both Geldart A and B solids. Influence of probe location and type of pressure measurement (either absolute or differential) were also analyzed and discussed. (C) 2007 Elsevier B.V. All rights reserved.
Subject: gas fluidized beds
fluid-dynamic parameters
incipient fluidization
Country: Suíça
Editor: Elsevier Science Sa
Rights: fechado
Identifier DOI: 10.1016/j.powtec.2007.01.015
Date Issue: 2007
Appears in Collections:Unicamp - Artigos e Outros Documentos

Files in This Item:
File Description SizeFormat 
WOS000247021100004.pdf528.06 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.