Please use this identifier to cite or link to this item:
Type: Artigo de periódico
Title: Influence of hydrogen on the thermomechanical properties of a-CNx : H and a-CNx films deposited by glow discharge and ion beam assisted deposition
Author: Champi, A
Barbieri, PF
Marques, FC
Abstract: The coefficient of thermal expansion (CTE), Young's modulus, Poisson's ratio, stress and hardness of a-CNx and a-CNx:H were investigated as a function of nitrogen concentration. Hydrogenated films were prepared by glow discharge, GD, and unhydrogenated films were prepared by ion beam assisted deposition, IBAD. Using nanohardness measurements and the thermally induced bending technique, it was possible to extract separately, Young's modulus and Poisson's ratio. A strong influence of hydrogen, in a-CNx:H films, was observed on the CTE, which reaches about similar to 9 x 10(-6) C-1, close to that of graphite (similar to 8 x 10(-6) C-1) for nitrogen concentration as low as 5 at.%. On the other hand, the CTE of unhydrogenated films increases with nitrogen concentration. at a much lower rate, reaching 5.5 x 10(-6) C-1 for 33 at.% nitrogen. (c) 2006 Elsevier B.V. All rights reserved.
Subject: carbon
mechanical properties
Country: Holanda
Editor: Elsevier Science Bv
Citation: Journal Of Non-crystalline Solids. Elsevier Science Bv, v. 352, n. 21-22, n. 2264, n. 2266, 2006.
Rights: fechado
Identifier DOI: 10.1016/j.jnoncrysol.2006.02.005
Date Issue: 2006
Appears in Collections:Unicamp - Artigos e Outros Documentos

Files in This Item:
File Description SizeFormat 
WOS000238799800031.pdf110.51 kBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.