Please use this identifier to cite or link to this item:
Type: Artigo de periódico
Title: TS-FF-AAS and multivariate calibration: A proposition for sewage sludge slurry sample analyses
Author: Petrucelli, GA
Poppi, RJ
Mincato, RL
Pereira-Filho, ER
Abstract: This work describes a methodology for Cd and Pb determination in sewage sludge slurry samples using thermospray flame furnace atomic absorption spectrometry (TS-FF-AAS). The TS-FF-AAS system was equipped with a Ni tube atomizer placed on an oxidizing air/acetylene flame. Two multivariate calibration models based on partial least squares (PLS) were proposed using total peak profiles (recorded during 57 s). Metals concentration in the sewage sludge samples were from 1.87 to 6.26 mg kg(-1) for Cd and from 101 to 327 mg kg(-1) for Ph. The limits of detection and quantification were, respectively, 0.2 and 0.7 mu g kg(-1) for Cd and 8 and 26 mu g kg(-1) for Pb. These values were three times lower than the limits found when these metals were calibrated using linear calibration with aqueous standard solutions. (c) 2006 Elsevier B.V. All rights reserved.
Subject: TS-FF-AAS
sludge slurry samples
partial least squares
atomic absorption spectrometry
sample preparation
Country: Holanda
Editor: Elsevier Science Bv
Rights: fechado
Identifier DOI: 10.1016/j.talanta.2006.05.008
Date Issue: 2007
Appears in Collections:Artigos e Materiais de Revistas Científicas - Unicamp

Files in This Item:
File Description SizeFormat 
WOS000244369600017.pdf203.21 kBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.