Please use this identifier to cite or link to this item:
|Type:||Artigo de periódico|
|Title:||External Coefficient of Heat Transfer by Convection in Mixed Vessels Using Vertical Tube Baffles|
de Mores, D
|Abstract:||Many correlations in the literature have been proposed to predict the external heat transfer coefficient, but most of them are suggested for batch operations. This paper aims to experimentally investigate a steady state condition (usually found in industrial processes) of mixed vessels equipped with a four 45 degrees pitched-blade turbine and vertical tubular baffles to determine the external heat transfer coefficient. An empirical correlation based on the work of Sieder-Tate [Ind. Eng. Chem. 1936, 1429-1435] for a steady state condition using standard configuration of a mixing system is being proposed. A sucrose solution of 20% and 32% concentrations (w/w) and a mixing apparatus with a 50 L cylindrical flat bottom vessel are employed. Water was used as heating fluid running inside the vertical tubular baffles with an inlet temperature range from 25 to 45 degrees C and an impeller speed from 30 to 330 rpm. A new fit correlation was proposed based on the Sieder-Tate modeling, yielding good agreement with experimental data in steady states with deviations of less than 15% between observed and predicted external heat coefficients.|
|Editor:||Amer Chemical Soc|
|Citation:||Industrial & Engineering Chemistry Research. Amer Chemical Soc, v. 52, n. 6, n. 2434, n. 2438, 2013.|
|Appears in Collections:||Unicamp - Artigos e Outros Documentos|
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.