Please use this identifier to cite or link to this item:
Type: Artigo de periódico
Title: Electrochemical corrosion response of a low carbon heat treated steel in a NaCl solution
Author: Osorio, WR
Peixoto, LC
Garcia, LR
Garcia, A
Abstract: Dual-phase (DP) steels are produced from a specific heat treatment procedure and have recently emerged as a potential class of engineering materials for a number of structural and automobile applications. Such steels have high strength-to-weight ratio and reasonable formability. The present study aims to investigate the effects of four different and conventional heat treatments (i.e., hot rolling, normalizing, annealing, and intercritical annealing) on the resulting microstructural patterns and on the electrochemical corrosion behavior. Electrochemical impedance spectroscopy (EIS) and Tafel plots were carried out on heat treated steel samples in a 0.5 M NaCl solution at 25 degrees C with neutral pH. An equivalent circuit analysis was also used to provide quantitative support for the discussions. The normalizing and the annealing heat treatments have provided the highest and the lowest corrosion resistances, respectively. The intercritical annealing and as-received (hot rolled) low carbon steel samples have shown similar corrosion behavior. Although a deleterious effect on the corrosion resistance has been verified for DIP steel due to the residual stress from the martensite formation, it combines good mechanical properties with intermediate electrochemical corrosion resistance.
Country: Alemanha
Editor: Wiley-v C H Verlag Gmbh
Citation: Materials And Corrosion-werkstoffe Und Korrosion. Wiley-v C H Verlag Gmbh, v. 60, n. 10, n. 804, n. 812, 2009.
Rights: fechado
Identifier DOI: 10.1002/maco.200805181
Date Issue: 2009
Appears in Collections:Unicamp - Artigos e Outros Documentos

Files in This Item:
File Description SizeFormat 
WOS000271555900005.pdf969.05 kBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.