Please use this identifier to cite or link to this item: http://repositorio.unicamp.br/jspui/handle/REPOSIP/63024
Type: Artigo de periódico
Title: CHEMICAL PREPARATION OF CONDUCTIVE ELASTOMERIC BLENDS - POLYPYRROLE EPDM .1. OXIDANT PARTICLE-SIZE EFFECT
Author: ZOPPI, RA
FELISBERTI, MI
DEPAOLI, MA
Abstract: This work describes the preparation of polypyrrole and EPDM rubber blends, PPy/EPDM, by the sorption of pyrrole (vapor phase) in an EPDM matrix containing CuCl2. We investigated the effect of the oxidant particle-size on the sorption and polymerization equilibrium, electrical conductivity, and mechanical properties of the blends. Independently of the CuCl2 concentration and polymerization time, the polypyrrole weight fraction in the blend, X(PPy), increases when the oxidant particle-size is changed from 150 250 mum to smaller than 106 mum. For blends containing 50 phr of CuCl2, obtained following 72 h of exposure to pyrrole, an increase in the Young's Modulus (from 2.2 +/- 0.2 to 3.9 +/- 0.6 MPa) and an increase in the electrical conductivity (from 10(-9) to 10(-7) S cm-1) was observed when the oxidant particle-size was decreased. Infrared spectroscopy, thermogravimetric analysis, scanning differential calorimetry, and scanning electron microscopy were used in sample characterization. (C) 1994 John Wiley & Sons, Inc.
Subject: CONDUCTIVE RUBBER
POLYPYRROLE EPDM BLEND
CHEMICAL PREPARATION
ELECTRICAL CONDUCTIVITY
MECHANICAL PROPERTIES
Editor: John Wiley & Sons Inc
Rights: fechado
Identifier DOI: 10.1002/pola.1994.080320601
Date Issue: 1994
Appears in Collections:Unicamp - Artigos e Outros Documentos

Files in This Item:
File Description SizeFormat 
WOSA1994NB41000001.pdf696.91 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.