Please use this identifier to cite or link to this item:
|Type:||Artigo de periódico|
|Title:||Determination of phthalates in water using fiber introduction mass spectrometry|
|Abstract:||Fiber introduction mass spectrometry (FIMS) - a direct coupling of SPME and MS - using selective ion monitoring (SIM) was used to detect and quantify dimethylphthalate (DMP), diethylphthalate (DEP) and dipropylphthalate (DPP) in mineral water. In FIMS, a chromatographic silicone septum is the only barrier between ambient and the high-vacuum mass spectrometer, permitting direct introduction of the SPME fiber into the ionization region of the equipment. After their thermal desorption and ionization and dissociation, the extracted phthalates are detected and quantitated by MS. Three types of SPME fibers were screened for best analyte sorption/desorption behaviors: 100 mum polydimethylsiloxane ( PDMS), 65 mum polydimethylsiloxane/divinylbenzene (PDMS/DVB) and 65 mum Carbowax/divinylbenzene (CW/DVB). The PDMS/DVB and CW/DVB fibers were then evaluated for precision, and quantitative figures of merit were assessed for extractions using the PDMS/DVB fiber, which displayed the best overall performance. FIMS with the PDMS/DVB fiber allows simple extraction and MS detection and quantitation of DMP in water with good linearity and precision, and at concentrations as low as 3.6 mug L-1. The LD and LQ of FIMS are below the maximum phthalate concentration allowed by the USEPA for drinking water ( 6 mug L-1).|
|Editor:||Royal Soc Chemistry|
|Appears in Collections:||Unicamp - Artigos e Outros Documentos|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.