Please use this identifier to cite or link to this item:
Type: Artigo de periódico
Title: Joule heating in amorphous metallic wires
Author: Knobel, M
Allia, P
GomezPolo, C
Chiriac, H
Vazquez, M
Abstract: Non-conventional heating treatments, such as Joule heating, can produce materials with attractive physical properties. Although extensively explored in amorphous wires and ribbons, one of the major drawbacks of the technique is the intrinsic difficulty in determining the annealing temperature. The temperature behaviour of two selected wires submitted to a DC electrical current of increasing amplitude was calibrated by comparing the temperature dependence of the material's saturation magnetization obtained during Joule heating to that measured during conventional annealing in a furnace. As a result, a correlation between the average temperature and current density was obtained. A theory describing the thermal effects of a continuous current flow in amorphous wires is proposed, showing that the thermal treatment is nearly uniform over the entire wire volume, under typical experimental conditions. The effect of fluctuations of the wire diameter on the steady-state temperature is also discussed.
Country: Inglaterra
Editor: Iop Publishing Ltd
Rights: fechado
Identifier DOI: 10.1088/0022-3727/28/12/002
Date Issue: 1995
Appears in Collections:Unicamp - Artigos e Outros Documentos

Files in This Item:
File Description SizeFormat 
WOSA1995TM75800002.pdf422.58 kBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.