Please use this identifier to cite or link to this item: http://repositorio.unicamp.br/jspui/handle/REPOSIP/56960
Type: Artigo de periódico
Title: Continuous hydride generation system for the determination of trace amounts of bismuth in metallurgical materials by atomic absorption spectrometry using an on-line stripping-type generator/gas-liquid separator
Author: Cadore, S
Baccan, N
Abstract: A method for the determination of trace amounts of bismuth using flow injection and atomic absorption spectrometry with hydride generation was developed. The introduction of 50 mu l of sample and tetrahydroborate solution into the HCl and aqueous carriers in a merging zones manifold allows the formation of bismuthine, which is separated from the liquid phase in an on-line stripping-type generator/gas-liquid separator, The calibration graph is linear from 0.1 to 100 ng ml(-1) Bi with a detection limit (3 sigma) of 320 pg ml(-1) Bi (corresponding to 16 pg Bi), The relative standard deviation for 20 replicates varies from 10% for 0.1 ng ml(-1) Bi to 1.9% for 100 ng ml(-1) Bi, with an injection frequency of up to 150 samples h(-1). Ni-II, Co-II, Ag-I, Hg-II, Se-IV and Sb-III interfere, but they can be masked with a thiourea-KI solution, The applicability of the proposed method to metallurgical samples was demonstrated by the analysis of certified reference materials.
Subject: bismuth determination
metallurgical materials
flow injection hydride generation
atomic absorption spectrometry
Country: Inglaterra
Editor: Royal Soc Chemistry
Rights: aberto
Identifier DOI: 10.1039/a606553h
Date Issue: 1997
Appears in Collections:Unicamp - Artigos e Outros Documentos

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.