Please use this identifier to cite or link to this item:
|Title:||Performance of modular SFCL using REBCO coated conductor tapes under repetitive overcurrent tests|
|Author:||Baldan, Carlos A.|
Shigue, Carlos Y.
Ruppert Filho, Ernesto
|Abstract:||Recently, the REBCO coated conductor tapes have shown great improvement in the critical current value along with excellent thermal and mechanical properties, turning it more cost attractive to develop superconducting fault current limiters (SFCLs). In spite of these evolutions on the I-c and n-index values, the effect of inhomogeneity on long tape lengths must be investigated, in particular, for application in resistive-type SFCLs where several hundredmetersmust be used for 15-kV voltage level units. The degradation or irreversible damage in REBCO tapes assisted by an optimized external shunt resistor was investigated on 12-mm-width tapes submitted to repetitive overcurrent tests. A modular unit with six stacks of 0.7-m-length tapes was built and tested by applying repetitive overcurrent during 80 ms, with recovery time intervals from 1 to 3 s (under load and no-load conditions), for prospective current levels from 0.8 to 3 kA, with the limiting factor of 1.7 and 3.2. The resistive type of SFCL, which is assisted by external shunt protection, indicates reliable operating conditions after 100 tests with the fault current level of 3 kA|
|Editor:||Institute of Electrical and Electronics Engineers|
|Appears in Collections:||FEEC - Artigos e Outros Documentos|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.