Please use this identifier to cite or link to this item:
Type: Artigo
Title: Physical simulation of a duplex stainless steel friction stir welding by the numerical and experimental analysis of hot torsion tests
Author: Fonseca, Eduardo Bertoni da
Santos, Tiago Felipe Abreu
Button, Sergio Tonini
Ramirez, Antonio Jose
Abstract: Physical simulation of friction stir welding (FSW) by means of hot torsion tests was performed on UNS S32205 duplex stainless steel. A thermomechanical simulator Gleeble 3800® with a custom-built liquid nitrogen cooling system was employed to reproduce the thermal cycle measured during FSW and carry out the torsion tests. Microstructures were compared by means of light optical microscopy and electron backscatter diffraction. True strain and strain rate were calculated by numerical simulation of the torsion tests. Thermomechanically affected zone (TMAZ) was reproduced at peak temperature of 1303 K (1030 °C), rotational speeds of 52.4 rad s−1 (500 rpm) and 74.5 rad s−1 (750 rpm), and 0.5 to 0.75 revolutions, which represent strain rate between 10 and 16 s−1 and true strain between 0.5 and 0.8. Strong grain refinement, similar to the one observed in the stir zone (SZ), was attained at peak temperature of 1403 K (1130 °C), rotational speed of 74.5 rad s−1 (750 rpm), and 1.2 revolution, which represent strain rate of 19 s−1 and true strain of 1.3. Continuous dynamic recrystallization in ferrite and dynamic recrystallization in austenite were observed in the TMAZ simulation. At higher temperature, dynamic recovery of austenite was also observed
Subject: Soldagem
Country: Estados Unidos
Editor: Springer
Rights: Aberto
Identifier DOI: 10.1007/s11661-016-3631-3
Date Issue: 2016
Appears in Collections:FEM - Artigos e Outros Documentos

Files in This Item:
File Description SizeFormat 
000380721600021.pdf2.69 MBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.