Please use this identifier to cite or link to this item:
|Title:||Exploring the Ti-5553 phase transformations utilizing in-situ high-temperature laser-scanning confocal microscopy|
|Author:||Campo, Kaio Niitsu|
Mello, Mariana Gerardi de
|Abstract:||Recently, the β metastable Ti-5553 alloy has attracted significant interest owing to the possibility of achieving excellent mechanical properties. In this study, for the first time, the Ti-5553 phase transformations were investigated using high-temperature laser-scanning confocal microscopy (HT-LSCM). During the continuous heating of an aged sample, the α phase dissolution was not clearly visible owing to the remaining grooves of former grain and interphase boundaries. However, the continuous cooling experiments (from the β field) showed that the α phase precipitation started preferentially at grain boundaries. With the increase in cooling rate, the α precipitates became more refined and the supercooling necessary to promote allotriomorphic precipitation increased. At a cooling rate of 100 °C min−1, no α phase was observed in the analyzed field of view. A higher oxygen content was suggested to contribute to the microstructural differences between the free surface and bulk. The volume fraction of the α phase was lower than that obtained on the original surface at cooling rates of 5, 25, and 50 °C min−1, while only minor differences were observed at cooling rates of 100 and 250 °C min−1. The α phase precipitation was analyzed in detail. The HT-LSCM technique can be a useful method for the analyses of solid-state phase transformations in Ti alloys|
|Appears in Collections:||FEM - Artigos e Outros Documentos|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.