Please use this identifier to cite or link to this item: http://repositorio.unicamp.br/jspui/handle/REPOSIP/344487
Type: Artigo
Title: Analysis of the life of cemented carbide drills with modified surfaces
Author: Rosa, Sílvia do Nascimento
Diniz, Anselmo Eduardo
Neves, Davi
Salles, Bruno Barbosa
Guerreiro, Sergio Stefano
Abstract: The performance of cemented carbide cutting tools during machining is influenced not only by the mechanical properties of the coating and substrate but also by the topographies of their surfaces. A tool with good coating and substrate properties but unsuitable topographies may exhibit accelerated wear and, consequently, impaired performance. In this work, drills coated using physical vapor deposition (PVD) were produced with different substrate textures, which in turn generated different coating textures. The surface roughness values of the coated drills were measured together with the residual stress at the interface between substrate and coating. Drilling tests were performed and tool wear was measured during the machining process. Two different tool coatings were studied: TiAlN and TiAlCrSiN. The goal was to study how the characteristics of the substrate and coating (material, surface topography, and residual stress) influence tool life. Tool life experiments were carried out using drilling tests in AISI 1548 steel, which is often used in crankshafts. The primary tool wear mechanism was attrition in all the drills. The main conclusion of this work is that the tool with the lowest roughness and a TiAlCrSiN coating had the best performance in the conditions tested here
Subject: Revestimentos
Country: Reino Unido
Editor: Springer
Rights: Fechado
Identifier DOI: 10.1007/s00170-013-5598-1
Address: https://link.springer.com/article/10.1007/s00170-013-5598-1
Date Issue: 2014
Appears in Collections:FEM - Artigos e Outros Documentos

Files in This Item:
File Description SizeFormat 
000333394300054.pdf3.15 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.