Please use this identifier to cite or link to this item: http://repositorio.unicamp.br/jspui/handle/REPOSIP/337387
Type: Artigo
Title: Flow uniformity data on 3D printed flow distributors
Author: Lopes, Mariana Garcia Mendonça
Santana, Harrson Silva
Andolphato, Vinícius Felix
Silva Jr., João Lameu
Taranto, Osvaldir Pereira
Abstract: Micro-chemical plants are chemical plants that use micrometrics structures by performing a numbering-up of microdevices. The flow distributor is responsible for the uniform distribution through these microdevices. Inadequate designs reduce the plant performance. Thus, 3D printing is a good alternative to allow fast and economic development for design tests. The present research applied 3D printing to manufacture flow distributors and evaluated the flow uniformity from experimental tests. This data article presents values of the non-uniformity flow coefficient (Ф) of three distinct distributors: the rectangular distributor (RD), the conical distributors with obstacle (CDO) and the conical distributor without obstacle (CD). The distributors were tested in water flow and at low flow rates, it was observed a flow maldistribution, related to the presence of air bubbles. For high flow rates the Ф reduced to values below 1%. The results presented here were used to validate the numerical simulations of flow distributors for numbering-up of biodiesel synthesis in micro and millidevices, “CFD analysis of flow distributor designs for numbering-up of biodiesel synthesis”
Subject: Impressão tridimensional
Country: Países Baixos
Editor: Elsevier
Rights: Aberto
Identifier DOI: 10.1016/j.dib.2019.103799
Address: https://www.sciencedirect.com/science/article/pii/S2352340919301507
Date Issue: Apr-2019
Appears in Collections:FEQ - Artigos e Outros Documentos

Files in This Item:
File Description SizeFormat 
000488305000026.pdf1.09 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.