Please use this identifier to cite or link to this item: http://repositorio.unicamp.br/jspui/handle/REPOSIP/337002
Type: Artigo
Title: Austenite reversion kinetics and stability during tempering of an additively manufactured maraging 300 steel
Author: Conde, F.F.
Escobar, J.D.
Oliveira, J.P.
Jardini, A.L.
Bose Filho, W.W.
Avilae, J.A.
Abstract: Reverted austenite is a metastable phase that can be used in maraging steels to increase ductility via transformation-induced plasticity or TRIP effect. In the present study, 18Ni maraging steel samples were built by selective laser melting, homogenized at 820 °C and then subjected to different isothermal tempering cycles aiming for martensite-to-austenite reversion. Thermodynamic simulations were used to estimate the inter-critical austenite + ferrite field and to interpret the results obtained after tempering. In-situ synchrotron X-ray diffraction was performed during the heating, soaking and cooling of the samples to characterize the martensite-to-austenite reversion kinetics and the reverted austenite stability upon cooling to room temperature. The reverted austenite size and distribution were measured by Electron Backscattered Diffraction. Results showed that the selected soaking temperatures of 610 °C and 650 °C promoted significant and gradual martensite-to-austenite reversion with high thermal stability. Tempering at 690 °C caused massive and complete austenitization, resulting in low austenite stability upon cooling due to compositional homogenization
Subject: Austenita
Martensita
Country: Países Baixos
Editor: Elsevier
Rights: Fechado
Identifier DOI: 10.1016/j.addma.2019.100804
Address: https://www.sciencedirect.com/science/article/pii/S2214860418308030
Date Issue: Oct-2019
Appears in Collections:FEQ - Artigos e Outros Documentos

Files in This Item:
File Description SizeFormat 
000492672600011.pdf3.14 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.