Please use this identifier to cite or link to this item:
Type: Artigo
Title: Tensile Properties And Related Microstructural Aspects Of Hypereutectic Al-si Alloys Directionally Solidified Under Different Melt Superheats And Transient Heat Flow Conditions
Author: Reyes
Rodrigo V.; Bello
Thomas S.; Kakitani
Rafael; Costa
Thiago A.; Garcia
Amauri; Cheung
Noe; Spinelli
Jose E.
Abstract: The present investigation deals with directional solidification (DS) of Al-15 wt% and 18 wt% Si alloys under transient heat flow conditions and further characterization of the related microstructures. Emphasis is given on the eutectic growth being affected not only by solidification kinetics but also by melt superheat, which is varied in two degrees for each alloy, i.e., 6% and 23% above the liquidus temperature. The dependences of interphase spacing (lambda) on both solidification kinetics (fast, intermediate and slow cooling conditions) and on melt superheat during solidification of hypereutectic alloys are reported for the first time. Furthermore, functional experimental interrelations of tensile mechanical properties and interphase spacing between eutectic Si particles of both alloys evaluated are proposed. It is shown by these correlations that the tensile properties increase with the decrease in these spacings. More significant variations in properties are associated with a certain range of spacings (1.0 mu m < lambda < 2.3 mu m) in the case of the Al-15 wt%Si alloy. Tensile strength and elongation-to-fracture decrease with increasing alloy silicon content. The applicability of the eutectic growth expression lambda=f (V-1/2) has been verified for the present tested alloys and experimental conditions.
Subject: Al-si Alloys
Mechanical Properties
Editor: Elsevier Science SA
Rights: fechado
Identifier DOI: 10.1016/j.msea.2016.12.096
Date Issue: 2017
Appears in Collections:Unicamp - Artigos e Outros Documentos

Files in This Item:
File SizeFormat 
000394190400028.pdf3.25 MBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.