Please use this identifier to cite or link to this item:
Type: Artigo
Title: Investigation Of Pressure Drop In Horizontal Pipes With Different Diameters
Author: Hamad
F. A.; Faraji
F.; Santim
C. G. S.; Basha
N.; Ali
Abstract: The pressure drop has a significant importance in multiphase flow systems. In this paper, the effect of the volumetric quality and mixture velocity on pressure drop of gas-liquid flow in horizontal pipes of different diameters are investigated experimentally and numerically. The experimental facility was designed and built to measure the pressure drop in three pipes of 12.70, 19.05 and 25.40 mm. The water and air flow rates can be adjusted to control the mixture velocity and void fraction. The measurements are performed under constant water flow rate (CWF) by adding air to the water and constant total flow rate (CTF) in which the flow rates for both phases are changed to give same CTF. The drift-flux model is also used to predict the pressure drop for same cases. The present data is also compared with a number of empirical models from the literature. The results show that: i) the pressure drop increases with higher volumetric qualities for the cases of constant water flow rate but decreases for higher volumetric qualities of constant total flow rate due to the change in flow pattern. ii) The drift-flux model and homogenous model are the most suitable models for pressure drop prediction. (C) 2017 Elsevier Ltd. All rights reserved.
Subject: Air-water Flow
Pressure Drop
Horizontal Pipes
Experimental Measurement
Drift-flux Model
Editor: Pergamon-Elsevier Science LTD
Rights: fechado
Identifier DOI: 10.1016/j.ijmultiphaseflow.2017.01.007
Date Issue: 2017
Appears in Collections:Unicamp - Artigos e Outros Documentos

Files in This Item:
File SizeFormat 
000398752500009.pdf1.64 MBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.