Please use this identifier to cite or link to this item: http://repositorio.unicamp.br/jspui/handle/REPOSIP/329727
Type: Artigo
Title: Tool Wear Mechanisms In The Machining Of Steels And Stainless Steels
Author: Diniz
Anselmo Eduardo; Machado
Alisson Rocha; Correa
Janaina Geilser
Abstract: In machining processes, tool performance is measured by the tool life, which is determined by the tool wear rate. This rate is strongly dependent on the tool wear mechanisms that occur in a specific process. Moreover, determining the wear mechanism is a fundamental task for the development of cutting tools. However, the tool wear mechanism depends on factors such as the workpiece material, the cutting operation, the properties of the tool material, the cutting conditions, and the cooling/lubrication system. This study aims to contribute to the understanding of the mechanisms that cause wear in tools. First, it presents a review of the literature describing the wear mechanisms that are present in metal cutting. Then, an analysis of the tool wear mechanisms during the machining of steels and stainless steels using different cutting tools is presented based on a review of studies performed mostly by research groups at the University of Campinas and Federal University of Uberlandia, Brazil. This analysis was performed using pictures of the worn regions taken in a scanning electronic microscope (SEM) with energy-dispersive spectroscopy (EDS) device which are fundamental to better understand the causes of tool wear. The major findings of this work were as follows: (i) Attrition is a very important wear mechanism in the machining of ductile materials such as steels and stainless steels; (ii) when a steel alloy with high ductility and work hardening rate is machined, a hard burr occurs in the end of the depth of cut and the burr-furrowing effect on the tool coating stimulates the attrition mechanism; and (iii) other wear mechanisms like abrasion and diffusion also appear in the machining of steels and stainless steels.
Subject: Tool Wear Mechanisms
Abrasion
Attrition
Diffusion
Machining Of Steels
Editor: Springer London LTD
London
Rights: fechado
Identifier DOI: 10.1007/s00170-016-8704-3
Address: https://link-springer-com.ez88.periodicos.capes.gov.br/article/10.1007%2Fs00170-016-8704-3
Date Issue: 2016
Appears in Collections:Unicamp - Artigos e Outros Documentos

Files in This Item:
File SizeFormat 
000388988300061.pdf3.88 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.