Please use this identifier to cite or link to this item:
Type: Artigo
Title: Tool Life And Surface Roughness In The Milling Of Curved Hardened-steel Surfaces
Author: Kull Neto
Henrique; Diniz
Anselmo Eduardo; Pederiva
Abstract: The manufacturing of molds and dies requires that complex hardened-steel surfaces be milled. The deep cavities in these parts are generally cut using high-speed machining technologies and long, slender tools. Consequently, the milling cutter has a tendency to vibrate, potentially damaging the surface of the workpiece and causing the cutting tool to chip or break. This study investigates tool life, cutting forces, and surface roughness in ball-end milling of a curved, convex surface of AISI D6 tool steel with a hardness of 62 HRC. The main goal was to find cutting conditions that provide good surface quality with long tool life. Two cutting strategies (upward and downward) with three lead angles (-16A degrees, 0A degrees, and 16A degrees) were tested. Analysis of variance was used to understand the results better. Adhesion followed by chipping of the cutting edge was the main wear mechanism found. The results show a close relationship between radial components of the machining forces and surface roughness and tool life. The cutting conditions that provided the lowest radial force also generated the best surface finish and the longest tool life (an upward strategy with a lead angle of 0A degrees).
Subject: Milling Of Dies And Molds
Tool Life
Tool Vibration
Hardened Steel
Editor: Springer London LTD
Rights: fechado
Identifier DOI: 10.1007/s00170-016-8640-2
Date Issue: 2016
Appears in Collections:Unicamp - Artigos e Outros Documentos

Files in This Item:
File SizeFormat 
000388988300045.pdf2.43 MBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.