Please use this identifier to cite or link to this item: http://repositorio.unicamp.br/jspui/handle/REPOSIP/326872
Type: Artigo
Title: Biosorption Study Of Copper And Zinc By Particles Produced From Silk Sericin - Alginate Blend: Evaluation Of Blend Proportion And Thermal Cross-linking Process In Particles Production
Author: da Silva
Thiago Lopes; da Silva Junior
Absolon Carvalho; Adeodato Vieira
Melissa Gurgel; Gimenes
Marcelino Luis; Carlos da Silva
Meuris Gurgel
Abstract: Sericin is a protein present in the cocoon of silkworm silk (Bombyx mori), usually discarded in the effluent from the spinning process, and alginate is a linear natural polysaccharide, extracted mainly from brown algae. Both biomaterials have been attracting attention due to their properties. Sericin isolated present weak structural properties, but its strongly polar side groups enable easy cross-linking, polymerization and blending. The use of blends provides an improvement in the physical characteristics of the materials produced with the protein, and the use of alginate has an advantage because it has affinity for a variety of cations. The aim of this paper is to evaluate the particles produced from the blend between sericin and alginate and its properties. The gelation technique, dripping blends in aqueous and alcoholic solutions of CaCl2, was applied to produce particles with 1%, 2% and 3% w/V of alginate in sericin solution (2.5% w/V). Posteriorly, the thermal cross-linking process at 40, 100, 125 and 150 degrees C was performed in sericinalginate particles and the biosorption processes of these particles for zinc and copper metals were investigated. The evaluation of the data was carried out through the measurement of water solubility, Scanning Electron Microscopy (SEM) images, Fourier Transform Infrared Spectrometry (STIR) spectra and adsorption capacity. Water solubility of particles decreased when they were produced in alcoholic solution, which is probably related to the formation of beta-sheet structure confirmed by FTIT analyses. Also, it was observed that adsorption capacity increased when the particles were produced in alcohol solution. The thermal cross-linking process increased the adsorption capacity until 100 degrees C, with values around 75% and 65% of reduction of Cu2+ and Zn2+, respectively. From temperature 100 degrees C all particles got higher degree of browning with an increase of solubility and decrease of adsorption capacity by particles because of the degradation of protein/polysaccharide. (C) 2015 Elsevier Ltd. All rights reserved.
Subject: Sericin Particles
Alginate Particles
Biosorption
Metal Affinity
Cross-linking
Thermal Cross-linking
Editor: Elsevier Sci Ltd
Oxford
Rights: fechado
Identifier DOI: 10.1016/j.jclepro.2015.05.067
Address: http://www-sciencedirect-com.ez88.periodicos.capes.gov.br/science/article/pii/S0959652615006228?via%3Dihub
Date Issue: 2016
Appears in Collections:Unicamp - Artigos e Outros Documentos

Files in This Item:
File SizeFormat 
000391079300132.pdf2.53 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.