Please use this identifier to cite or link to this item: http://repositorio.unicamp.br/jspui/handle/REPOSIP/320266
Type: Artigo de Periódico
Title: Interrelation Of Wettability-microstructure-tensile Strength Of Lead-free Sn-ag And Sn-bi Solder Alloys
Author: Osorio
WR; Garcia
A
Abstract: A comparative investigation on the wettability and tensile strength of a Sn-2Ag, a Sn-40Bi and the traditional eutectic Sn-Pb solder alloys was carried out. The wettability is represented by thickness of covered layer (TCL) and spread area (SA) while the mechanical behaviour by the ultimate tensile strength (UTS). It is shown that the TCL of studied alloys decreased with the increase in the dipping temperature. It is also shown that TCL and SA have opposite behaviour with respect to the cooling rate. The Sn-Bi solder alloy has lower SA when compared with those of the Sn-Ag solder when similar cooling rates are considered. The Sn-Bi solder exhibits the best UTS/SA combination for dendritic spacings between 25 and 27 mu m, associated with cooling rates similar to 2 degrees C s(-1), 2x lower than those of the Sn-Ag alloy. Besides, the Sn-Bi alloy has shown SA > 70 similar to 80% associated with higher UTS (similar to 80 MPa) as compared with the other alloys examined.
Subject: Lead-free Solders
Wettability
Dipping
Tensile Strength
Microstructure
Relative Cost
Editor: TAYLOR & FRANCIS LTD
Citation: Science And Technology Of Welding And Joining. TAYLOR & FRANCIS LTD, n. 21, n. 6, p. 429 - 437.
Rights: fechado
Identifier DOI: 10.1080/13621718.2015.1124176
Address: http://www.tandfonline.com/doi/abs/10.1080/13621718.2015.1124176
Date Issue: 2016
Appears in Collections:Unicamp - Artigos e Outros Documentos

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.