Please use this identifier to cite or link to this item:
Type: Artigo de periódico
Title: The Effect Of Photopolymerization On The Degree Of Conversion, Polymerization Kinetic, Biaxial Flexure Strength, And Modulus Of Self-adhesive Resin Cements
Author: Aguiar
Thaiane R.; de Oliveira
Michele; Arrais
Cesar A. G.; Ambrosano
Glaucia M. B.; Rueggeberg
Frederick; Giannini
Abstract: Statement of problem. Understanding the effect of the degree of conversion on the mechanical properties of auto- and dual-polymerizing self-adhesive resin cements leads to a better estimation of their performance in different clinical scenarios. Purpose. The purpose of this study was to evaluate the effect of photopolymerization on the degree of conversion (DC) and polymerization kinetic of 4 dual-polymerized resin cements, 20 minutes after mixing, and its effects on the mechanical properties (biaxial flexural strength [FS] and modulus [FM]) after short-term aging. Material and methods. Conventional (RelyX ARC and Clearfil Esthetic Cement) and self-adhesive resin cements (RelyX Unicem and Clearfil SA Cement) were applied to a Fourier infrared spectrometer to assess the DC (n=5) under the following 3 polymerization conditions: direct light exposure (dual-polymerizing mode), exposure through the prepolymerized disk, or autopolymerizing. The polymerization kinetic was recorded for 20 minutes. Then, disk-shaped specimens (n=11) were prepared to evaluate the effect of polymerization on the FS and FM in both extreme polymerization conditions (dual-polymerizing or autopolymerizing). Data were statistically analyzed by 2-way repeated measure ANOVA (DC) and by 2-way ANOVA (FS and FM), followed by the Tukey-Kramer post hoc test (alpha=.05). Results. Autopolymerizing groups exhibited reduced DC means, whereas intermediate values were observed when resin cements were polymerized through the disk. All groups exhibited higher DC at the end of 20 minutes. The polymerization kinetic revealed a rising curve, and materials, when directly photopolymerized, reached a plateau immediately after light exposure. Regarding the flexural biaxial testing, most of the resin cements were affected by polymerization mode and differences among groups were product dependent. Conclusions. The resin cements achieved immediate higher DC and mechanical properties when photopolymerized. The total absence of photoactivation may still impair their mechanical properties even after short-term aging.
Subject: Out Bond Strength
Luting Cements
Curing Mode
Monomer Conversion
Fiber Post
Country: NEW YORK
Citation: The Effect Of Photopolymerization On The Degree Of Conversion, Polymerization Kinetic, Biaxial Flexure Strength, And Modulus Of Self-adhesive Resin Cements. Mosby-elsevier, v. 113, p. 128-134 FEB-2015.
Rights: embargo
Date Issue: 2015
Appears in Collections:Unicamp - Artigos e Outros Documentos

Files in This Item:
File SizeFormat 
wos_000350188500008.pdf570.17 kBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.