Please use this identifier to cite or link to this item: http://repositorio.unicamp.br/jspui/handle/REPOSIP/244092
Type: Artigo de periódico
Title: Monomer Conversion, Microhardness, Internal Marginal Adaptation, And Shrinkage Stress Of Bulk-fill Resin Composites
Author: Fronza
Bruna Marin; Rueggeberg
Frederick Allen; Braga
Roberto Ruggiero; Mogilevych
Borys; Silva Soares
Luis Eduardo; Martin
Airton Abrahao; Ambrosano
Glaucia; Giannini
Marcelo
Abstract: Objective. To evaluate degree of conversion (DC), Knoop microhardness (KHN), internal marginal adaptation (IA), and polymerization shrinkage stress (PS) of one conventional and four bulk-fill composites. Methods. Bulk-fill composites tested were Surefil SDR (SDR), Filtek Bulk-Fill (FBF), Tetric EvoCeram Bulk-Fill (TEC), and EverX Posterior (EXP). The conventional composite Herculite Classic (HER) was tested using both incremental and bulk-fill insertion techniques. Standardized Class I preparations (4-mm-depth) were made in extracted molars and restored with each product system (N = 5). After 1-week wet storage, restorations were cross-sectioned and DC and KHN were evaluated at four depths (1, 2, 3, and 4 mm) using confocal Raman spectroscopy and KHN techniques, respectively. Epoxy resin replicas of restorations were evaluated using scanning electron microscopy for IA. PS was determined using composite bonded to acrylic rods attached to a universal testing machine (N = 5). Results. Within bulk-fill products, only SDR and FBF demonstrated similar DC at all depths, and KHN values did not statistically differ among depths, except for TEC. Neither placement method nor depth affected KHN or DC, except the DC of HER bulk-fill at 4 mm. Incrementally layered HER, and bulk-fills SDR and TEC demonstrated the lowest proportion of internal gaps. Highest and lowest PS values were measured for EXP and TEC, respectively. Significance. DC with depth was not uniform among all bulk-fill materials, although no difference in KHN was found. Higher PS correlated positively with higher proportion of interfacial gaps. The incremental technique using conventional composite showed reduced gap formation. (C) 2015 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.
Subject: Cavity-bottom Dentin
Polymerization Shrinkage
C-factor
Restorative Composites
Mechanical-properties
Contraction Stress
Bond Strength
Light
Depth
Cure
Country: OXFORD
Editor: ELSEVIER SCI LTD
Citation: Monomer Conversion, Microhardness, Internal Marginal Adaptation, And Shrinkage Stress Of Bulk-fill Resin Composites. Elsevier Sci Ltd, v. 31, p. 1542-1551 DEC-2015.
Rights: embargo
Identifier DOI: 10.1016/j.dental.2015.10.001
Address: http://www.sciencedirect.com/science/article/pii/S0109564115004315
Date Issue: 2015
Appears in Collections:Unicamp - Artigos e Outros Documentos

Files in This Item:
File SizeFormat 
wos_000366569800018.pdf1.11 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.