Please use this identifier to cite or link to this item:
Type: Artigo de periódico
Title: Influence Of Different Adhesive Protocols On Ceramic Bond Strength And Degree Of Conversion Of Resin Cements
Author: Fabiao
Mayra de Mello; Scarabello Stape
Thiago Henrique; Fujiwara Yanikian
Cristiane Rumi; de Lima
Adriano Fonseca; Gava Pizi
Eliane Cristina; Marchi Baron
Giselle Maria; Marcondes Martins
Luis Roberto
Abstract: Since light-curing through ceramic dental restorations can be attenuated by the material crystalline structure, the use of specific adhesive protocols might enhance bonding effectiveness of dual-cure resin cements. This study evaluated the micro-shear bond strength (mu SBS) of different adhesive protocols containing dual-cured resin cements bonded to two glass ceramics: fluorapatite leucite (FLC) and lithium dissilicate reinforced ceramic (LDC), and their effect on the degree of conversion (DC) of resin cements. For each ceramic, eight adhesive protocols were tested using combinations of three different resin cements and four adhesive resins. Following the adhesive resin application on ceramic disk surface, resin cement cylinders were produced. After 24 h, the mu SBS test was performed (n=8), a shear load was applied at a crosshead speed of 0.5 mm/min until failure and fracture patterns were determined. Resin cement DC analysis was performed by Fourier Transform Infrared Spectroscopy (n=5). Data were statistically analyzed using two-way ANOVA, followed by Tukey test (alpha=0.05). The interaction of adhesive protocol and ceramic type significantly affected the micro-shear bond strength and resin cement DC (p < 0.0001). For the FLC, adhesive protocols containing the conventional resin cement produced higher mu SBS values compared to the remaining protocols. For the LDC, the combination of the conventional resin cement and an adhesive resin containing photoactivators produced higher mu SBS compared to the other tested adhesive protocols. The conventional resin cement and the self-etch cement produced higher conversion values when luted to the LDC. Selection of specific adhesive protocols should be carefully considered to improve bonding to glass ceramics. (C) 2015 Elsevier Ltd. All rights reserved.
Subject: Porcelain Laminate Veneers
Retrospective Evaluation
Dental Restorations
Polymerization Mode
Country: OXFORD
Citation: Influence Of Different Adhesive Protocols On Ceramic Bond Strength And Degree Of Conversion Of Resin Cements. Elsevier Sci Ltd, v. 62, p. 7-13 OCT-2015.
Rights: embargo
Identifier DOI: 10.1016/j.ijadhadh.2015.06.006
Date Issue: 2015
Appears in Collections:Unicamp - Artigos e Outros Documentos

Files in This Item:
File SizeFormat 
wos_000361401900002.pdf904.45 kBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.