Please use this identifier to cite or link to this item:
Type: Artigo de periódico
Title: Raman Imaging Spectroscopic Characterization Of Modified Poly(dimethylsiloxane) For Micro Total Analysis Systems Applications.
Author: de Campos, Richard Piffer Soares
Yoshida, Inez Valeria Pagotto
Breitkreitz, Márcia Cristina
Poppi, Ronei Jesus
Fracassi da Silva, José Alberto
Abstract: Methacryloxypropyl-modified poly(dimethylsiloxane) rubbers were obtained from poly(dimethylsiloxane), PDMS, and methacryloxypropyltrimethoxysilane, MPTMS, by polycondensation reactions. The modified rubbers, prepared with 20 and 30% (v/v) of MPTMS, were used as substrates for microchannel fabrication by the CO(2) laser ablation technique. Raman imaging spectroscopy was used for the surface characterization, showing the homogeneity of the rubbery material, with uniform distribution of the crosslinking centers. Under the experimental conditions used, damage to the rubber from the CO(2) laser radiation used for the channel engraving was not observed. Correlation maps of the surface were obtained in order to spatially evaluate the modification inside and outside the channels. The correlations between the methacryloxypropyl-modified poly(dimethylsiloxane) rubbers and MPTMS (spectral range of 1800-1550 cm(-1)) and PDMS (spectral range of 820-670 cm(-1)) precursors were higher than 0.95 and 0.99, respectively. In addition, Raman imaging spectroscopy allows monitoring the topography of the fabricated microchannel.
Subject: Dimethylpolysiloxanes
Spectrum Analysis, Raman
Citation: Spectrochimica Acta. Part A, Molecular And Biomolecular Spectroscopy. v. 100, p. 67-71, 2013-Jan.
Rights: fechado
Identifier DOI: 10.1016/j.saa.2012.03.054
Date Issue: 2013
Appears in Collections:Unicamp - Artigos e Outros Documentos

Files in This Item:
File SizeFormat 
pmed_22542689.pdf641.17 kBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.