Please use this identifier to cite or link to this item: http://repositorio.unicamp.br/jspui/handle/REPOSIP/199500
Type: Artigo de periódico
Title: Effect Of The Curing Method And Composite Volume On Marginal And Internal Adaptation Of Composite Restoratives.
Author: Souza-Junior, Eduardo José
de Souza-Régis, Marcos Ribeiro
Alonso, Roberta Caroline Bruschi
de Freitas, Anderson Pinheiro
Sinhoreti, Mario Alexandre Coelho
Cunha, Leonardo Gonçalves
Abstract: The aim of the present study was to evaluate the influence of curing methods and composite volumes on the marginal and internal adaptation of composite restoratives. Two cavities with different volumes (Lower volume: 12.6 mm(3); Higher volume: 24.5 mm(3)) were prepared on the buccal surface of 60 bovine teeth and restored using Filtek Z250 in bulk filling. For each cavity, specimens were randomly assigned into three groups according to the curing method (n=10): 1) continuous light (CL: 27 seconds at 600 mW/cm(2)); 2) soft-start (SS: 10 seconds at 150 mW/cm(2)+24 seconds at 600 mW/cm(2)); and 3) pulse delay (PD: five seconds at 150 mW/cm(2)+three minutes with no light+25 seconds at 600 mW/cm(2)). The radiant exposure for all groups was 16 J/cm(2). Marginal adaptation was measured with the dye staining gap procedure, using Caries Detector. Outer margins were stained for five seconds and the gap percentage was determined using digital images on a computer measurement program (Image Tool). Then, specimens were sectioned in slices and stained for five seconds, and the internal gaps were measured using the same method. Data were submitted to two-way analysis of variance and Tukey test (p<0.05). Composite volume had a significant influence on superficial and internal gap formation, depending on the curing method. For CL groups, restorations with higher volume showed higher marginal gap incidence than did the lower volume restorations. Additionally, the effect of the curing method depended on the volume. Regarding marginal adaptation, SS resulted in a significant reduction of gap formation, when compared to CL, for higher volume restorations. For lower volume restorations, there was no difference among the curing methods. For internal adaptation, the modulated curing methods SS and PD promoted a significant reduction of gap formation, when compared to CL, only for the lower volume restoration. Therefore, in similar conditions of the cavity configuration, the higher the volume of composite, the greater the gap formation. In addition, modulated curing methods (SS and PD) can improve the interfacial quality of composite restorations through the reduction of internal gaps in lower volume composite restoratives.
Subject: Acid Etching, Dental
Animals
Carbon Compounds, Inorganic
Cattle
Composite Resins
Curing Lights, Dental
Dental Cavity Preparation
Dental Cements
Dental Leakage
Dental Marginal Adaptation
Dental Materials
Dental Polishing
Dental Restoration, Permanent
Diamond
Fluorescent Dyes
Image Processing, Computer-assisted
Light-curing Of Dental Adhesives
Radiation Dosage
Random Allocation
Rhodamines
Silicon Compounds
Surface Properties
Temperature
Time Factors
Water
Rights: fechado
Identifier DOI: 10.2341/10-107-L
Address: http://www.ncbi.nlm.nih.gov/pubmed/21702671
Date Issue: -1-Uns- -1
Appears in Collections:Unicamp - Artigos e Outros Documentos

Files in This Item:
File SizeFormat 
pmed_21702671.pdf209.16 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.