Please use this identifier to cite or link to this item: http://repositorio.unicamp.br/jspui/handle/REPOSIP/197129
Type: Artigo de periódico
Title: Effect Of Resin Liners And Photoactivation Methods On The Shrinkage Stress Of A Resin Composite.
Author: Cunha, Leonardo Gonçalves
Alonso, Roberta Caroline Bruschi
Sobrinho, Lourenço Correr
Sinhoreti, Mário Alexandre Coelho
Abstract: This study was undertaken to evaluate the effect of three different photoactivation methods on the polymerization shrinkage stress of a resin composite using different resin liners. Three photoactivation methods using a quartz-tungsten-halogen light were evaluated: continuous light, soft start, and intermittent light. Three lining groups were tested: one or three coats of adhesive, and flowable composite. The stress was measured using a universal testing machine. After the stress measurement, Knoop hardness numbers (KHNs) were evaluated to verify indirectly the degree of conversion of the composite using the three photoactivation methods. The data were submitted to analysis of variance and Tukey's test (p < .05). Intermittent light was always associated with statistically lower stress values when compared with continuous light. Statistical differences were not observed when continuous light and soft start were compared. The use of a flowable composite liner significantly reduced the stress generation when compared with the use of one adhesive coat. The three adhesive coats groups showed intermediate stress values. The hardness test showed no statistical difference between that achieved with continuous light and soft start. These two methods showed statistically higher KHNs when compared with results with intermittent light. Photoactivation using intermittent light may lead to a significant reduction in shrinkage stress levels. This effect could be attributed to a significant reduction of the polymerization rate and/or a decrease in the degree of conversion. The use of a flowable composite liner reduced the stress levels when compared with levels when one coat of adhesive was used. This is possibly related to the higher thickness of the flowable composite layer.
Subject: Analysis Of Variance
Composite Resins
Dental Cavity Lining
Dental Marginal Adaptation
Dental Restoration, Permanent
Dental Stress Analysis
Halogens
Hardness Tests
Light
Resin Cements
Technology, Dental
Rights: fechado
Identifier DOI: 
Address: http://www.ncbi.nlm.nih.gov/pubmed/16426507
Date Issue: 2006
Appears in Collections:Unicamp - Artigos e Outros Documentos

Files in This Item:
File SizeFormat 
pmed_16426507.pdf250.33 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.