Please use this identifier to cite or link to this item:
|Type:||Artigo de periódico|
|Title:||Photoassisted Electrochemical Degradation Of Organic Pollutants On A Dsa Type Oxide Electrode: Process Test For A Phenol Synthetic Solution And Its Application For The E1 Bleach Kraft Mill Effluent.|
|Author:||Pelegrini, R T|
Freire, R S
|Abstract:||In this paper, the performance of a photoassisted electrolysis process, for the degradation of organic pollutants, is investigated. Results obtained in this work have shown that the thermally prepared anode of titanium, coated with 70TiO2/30RuO2, exhibits photoactivity and may be used for the treatment of effluents. A synthetic phenol aqueous solution and a real paper mill industry effluent were treated. Kinetic analysis showed a synergetic effect of electrolysis and photocatalysis and degradation rates are an order of magnitude greater than the sum of the results reached by using both processes individually. Using a 125 W mercury bulb and 20 mA cm-2, the phenol concentration decayed 85% in 90 min and 70% reduction of TOC was obtained. In the application of the treatment process for the degradation of the E1 bleach Kraft mill effluent, total phenols were practically eliminated in a short period of processing time, and color, usually resistant to biological treatment, was reduced to 10% from its initial value measured in terms of absorbance. Reductions of AOX, COD, and BOD by 25%, 30%, and 35%, respectively, were also observed.|
Waste Disposal, Fluid
Water Pollutants, Chemical
|Citation:||Environmental Science & Technology. v. 35, n. 13, p. 2849-53, 2001-Jul.|
|Appears in Collections:||Unicamp - Artigos e Outros Documentos|
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.