Please use this identifier to cite or link to this item: http://repositorio.unicamp.br/jspui/handle/REPOSIP/102596
Type: Artigo de evento
Title: Characterization Of Laser Cladding Wc-co Composite Coatings [caracterização De Revestimentos Compósitos Wc-co Depositados Por Fusão A Laser]
Author: Pinto M.A.
Costa L.
Colaco R.
Vilar R.
Lerardi M.C.F.
Abstract: A number of works have shown that, if a proper selection of the operating parameters is made, laser cladding enables for the production of composite coatings with an homogeneous distribution of hard particles in a tough matrix free from defects, such as porosity or cracks. In the present work WC-Co composite coatings were produced by this technique. A powder mixture with 70%wt. of WC and 30%wt. of Co was used to produce the coating and an AISI 1045 steel was used as substrate. The microstructural characterization was made by optical microscopy, scanning electron microscopy (with EDS microprobe) and X-ray diffraction. Vickers microhardness tests were made in the cross section of the coatings. The microstructure of the coatings is essentially formed by a cobalt rich matrix with WC and Co3W3C carbide particles. Nevertheless, it was found that small local changes in the chemical composition results in different solidification paths that leads to dramatic modifications of the morphologies of the microstructural components. This results are discussed and analyzed on the basis of the C-Co-W ternary phase diagram.
Editor: 
Rights: fechado
Identifier DOI: 
Address: http://www.scopus.com/inward/record.url?eid=2-s2.0-1842576575&partnerID=40&md5=8a7c99192145ca6ff7d30c3ad37ed127
Date Issue: 2003
Appears in Collections:Unicamp - Artigos e Outros Documentos

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.