Please use this identifier to cite or link to this item:
Type: Artigo de periódico
Title: Development Of An Amperometric Sensor Highly Selective For Dopamine And Analogous Compounds Determination Using Bis(2,2′-bipyridil) Copper(ii) Chloride Complex
Author: Sotomayor M.D.P.T.
Tanaka A.A.
Kubota L.T.
Abstract: The use of [Cu(bipy)2]Cl2·6H2O as a biomimetic catalyst in the construction of an amperometric sensor for dopamine determination is reported. The sensor was prepared modifying a glassy carbon electrode with a Nafion membrane doped with [Cu(bipy)2]Cl2·6H2O complex. The sensor presented a higher response in 0.25 mol L-1 phosphate buffer solution (pH 7.0), with an applied potential of - 50 mV (vs. SCE). In the optimized operational conditions, a linear response range between 35 and 240 μmol L-1, with a sensitivity of 2.02 ± 0.07 nA 1 μmoL-1 cm-2 and detection limit of 8.0 μmol L-1 were typically observed for the sensor. The response time presented for this sensor was 0.5 s, presenting the same response for at least 40 successive measurements, with good repeatability (3.0%) expressed as relative standard deviation for n = 6. The difference of the response between four sensor preparations was 4%. A detailed investigation about the sensor response for other sixteen phenolic compounds and interfering species were carried out. The sensor was applied in the determination of dopamine in pharmaceutical preparation with success.
Rights: fechado
Identifier DOI: 10.1002/elan.200390097
Date Issue: 2003
Appears in Collections:Unicamp - Artigos e Outros Documentos

Files in This Item:
File Description SizeFormat 
2-s2.0-0038712426.pdf198.09 kBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.