Please use this identifier to cite or link to this item:
Type: Artigo de periódico
Title: Turn-milling: Some Concepts And Experimental Results [fresotorneamento: Alguns Conceitos E Resultados Experimentais]
Author: Novaski Olivio
Lisboa Eduardo Silva
Abstract: This work presents the concepts and definitions of a combined machining process, so called turn-milling. Several methods of turn-milling are presented with major emphasis on the orthogonal process, studied experimentally. Test specimens made of ABNT 52100 bearing steel, with average hardness of 60-61 HRc were machined. The cutting tool material applied was mixed ceramic inserts. Several feed rate, tool diameter and rotational speeds of workpiece and tool were tested. Tests were conducted on a CNC lathe which had a milling head coupled to it. This coupling was made on the transverse carrier, figuring an orthogonal exposure of the rotating axes for workpiece and tool, thus characterizing orthogonal turn-milling. The achieved results showed that work quality and low roughness values can be obtained; however, the technology must be better investigated.
Editor: Braz Soc Mech Sci, Rio de Janeiro, Brazil
Rights: aberto
Identifier DOI: 
Date Issue: 1997
Appears in Collections:Unicamp - Artigos e Outros Documentos

Files in This Item:
There are no files associated with this item.

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.