Please use this identifier to cite or link to this item:
|Type:||Artigo de periódico|
|Title:||Role of catalyst preparation on determining selective sites for hydrogenation of dimethyl adipate over RuSn/Al2O3|
|Abstract:||The hydrogenation of dimethyl adipate over RuSn/Al2O3 catalysts was studied. Attention was given to the effects of the preparation method and pretreatment conditions on the selective production of 1,6-hexanediol. The catalysts were prepared by co-impregnation and sol gel methods. The liquid phase catalytic reaction revealed that hexanediol can only be produced over the catalyst obtained by co-impregnation and calcined at low temperature. This system allowed 49% selectivity at practically total ester conversion. No diol could be formed when the same system was formerly calcined at 600 degrees C or over the sol gel catalyst. Mossbauer spectra revealed the occurrence of the same tin species in all catalysts; the distinct performance was thus attributed to the location of such species on the surface as evidenced by XPS. The results presented in this work indicated that alumina-supported Ru-Sn bimetallic catalysts may indeed be appropriate for 1,6-hexanediol production from DMA. However, the generation of tin oxidic species is not solely decisive for the formation of catalytically active sites. A suitable preparation method must be applied in order to better localize the SnOx moieties and tailor the required Ru-SnOx selective sites. (c) 2006 Elsevier B.V. All rights reserved.|
|Editor:||Elsevier Science Bv|
|Citation:||Journal Of Molecular Catalysis A-chemical. Elsevier Science Bv, v. 253, n. 41671, n. 62, n. 69, 2006.|
|Appears in Collections:||Unicamp - Artigos e Outros Documentos|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.