Please use this identifier to cite or link to this item:
Type: Artigo
Title: Fabrication Of Pcl/beta-tcp Scaffolds By 3d Mini-screw Extrusion Printing
Author: Davila
J. L.; Freitas
M. S.; Inforcatti Neto
P.; Silveira
Z. C.; Silva
J. V. L.; d'Avila
M. A.
Abstract: Scaffolds of polycaprolactone (PCL) and PCL composites reinforced with -tricalcium phosphate (-TCP) were manufactured aiming potential tissue engineering applications. They were fabricated using a three-dimensional (3D) mini-screw extrusion printing, a novel additive manufacturing process, which consists in an extrusion head coupled to a 3D printer based on the Fab@Home equipment. Thermal properties were obtained by differential scanning calorimetry and thermogravimetric analyses. Scaffolds morphology were observed using scanning electron microscopy and computed microtomography; also, reinforcement presence was observed by X-ray diffraction and the polymer chemical structure by Fourier transform infrared spectroscopy. Mechanical properties under compression were obtained by using a universal testing machine and hydrophilic properties were studied by measuring the contact angle of water drops. Finally, scaffolds with 55% of porosity and a pore size of 450 m have shown promising mechanical properties; the -TCP reinforcement improved mechanical and hydrophilic behavior in comparison with PCL scaffolds. (c) 2015 Wiley Periodicals, Inc.
Subject: Biomaterials
Editor: Wiley-Blackwell
Citation: Journal Of Applied Polymer Science. Wiley-blackwell, v. 133, p. , 2016.
Rights: fechado
Identifier DOI: 10.1002/app.43031
Date Issue: 2016
Appears in Collections:Unicamp - Artigos e Outros Documentos

Files in This Item:
File SizeFormat 
000368731300001.pdf1.09 MBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.